Industrial

Dynaloy has developed a line of safe, effective products that remove adhesives and polyimides as well as clean molds. The products from our Dynasolve line that fit this purpose include Dynasolve 100, Dynasolve 185, and Dynasolve 218.
Dynaloy engineers chemistries for non-industry specific applications where exacting performance standards must be met.

If you have an application that requires more than an “off-the-shelf” solution, please contact Dynaloy.
 

Dynasolve

Dynasolve 100
Dynasolve 100 is a powerful solvent blend used for the removal of rigid urethane foams, acrylic films, and acrylic-based adhesives.
Dynasolve 185
Dynasolve 185 is an effective cleaning solvent for cured amine-cured epoxy. It contains a proprietary blend of ingredients that facilitate polymer removal and prevent the depositing of particles back onto a part.
Dynasolve 2000
Dynasolve 2000 is a reactive solvent used for removal of several types of polymers. It is aluminum-safe for a 24-hour time period.
Dynasolve 218
Dynasolve 218 is an effective cleaning solvent for cured silicone. It is a reactive solvent which will actually dissolve silicone.
Dynasolve 699
Dynasolve 699 is a unique solvent designed to remove acrylic and methacrylate adhesives. This formulation is designed for maximum safety without sacrificing performance.
Dynasolve 711
Dynasolve 711 is a reactive solvent used for removal of several types of polymers. It is aluminum-safe for a 24-hour time period.
Dynasolve 750
Dynasolve 750 is a reactive solvent used for removal of several types of polymers. Dynasolve 711 should be used if an aluminum-safe product is needed
Dynasolve CU-5
Dynasolve CU-5 is an effective cleaning solvent for cured urethanes. It is nonchlorinated, nonflammable (by U.S. Department of Transportation definition), and non-ozone depleting.
Dynasolve CU-7
Dynasolve CU-7 is a safer solvent used for removing polyimide coatings. It is used extensively in the fiber optics industry.
Dynasolve CU-9
Dynasolve CU-9 is used in the urethane-molding industry for removing the buildup of silicone release agent and cured urethane from tooling.
Dynasolve M-10
Dynasolve M-10 is an excellent product for removing uncured silicones, silicone oils, and silicone-based mold release agents.
Dynasolve M-35
Dynasolve M-35 is a very safe product used for flushing uncured epoxy. It is also very effective at removing cured cyanoacrylate adhesives.
Dynasolve Mold Cleaner 1000
Dynasolve Mold Cleaner 1000 is used in the urethane molding industry for removing cured urethane from tooling but leaving behind the layer of silicone-based release agent.

Citru-Dyn

Citru-Dyn
Citru-Dyn is a special blend of surfactants, soaps, and solvents formulated to remove tough oils and grease.