![](3D"DynasolveSP9110Web_files/image002.jpg")
DYNASOLV=
E SP9110
Vapor
Degreaser Cleaner
Dynasolve SP9110, an azeo= tropic blend of n-propyl bromide and IPA, is a fast evaporating cleaning solvent t= hat can be used for critical cleaning applications as well as final rinsing applications. It is a cost-ef= fective replacement for some CFC and HCFC applications. Dynasolve SP9110 has physical prop= erties similar to 1,1,1-trichloroethane but is environmentally friendly. It makes a good replacement for IP= A and acetone where elimination of highly flammable solvents is necessary. Dynasolve SP9110 is compatible wit= h most vapor degreaser units, but the optimum operating temperature will have to be determined for each application.
BENEFITS: =
&nb=
sp; =
&nb=
sp; =
· = excellent solvency
· = fast drying
· = economical alternative to CFC/HCFC
· = non-flammable per DOT
· = dries residue-free
OPERATING RECOMMENDATIONS:
|
|
Wash bath make-up s=
hould be
100%. Can be used in most v=
apor
degreaser machines. Most un=
its
will require heating solvent 110-150°F/ 43-65°C. Optimum temperature must be dete=
rmined
for specific equipment and cleaning requirements. Can also be used in soak baths w=
ith
mechanical agitation such as ultrasonics or spray-under-immersion. |
|
Rinsing |
When using in vapor
degreaser equipment, rinsing is completed in the vapor phase. If using in other equipment, rin=
se
with IPA, acetone or clean SP9110. |
|
Dry |
Dry with forced air=
, oven,
or other appropriate method.
Drying methods may not need to be implemented when using vapor
degreaser equipment. |
TYPICAL
SPECIFICATIONS:
|
Appearance |
colorless |
|
Flash point |
>175°F/79&de=
g;C |
|
Specific gravity |
1.30 |
|
Surface tension |
25 dynes/cm |
|
Viscosity |
water thin |
APPLICATIONS:=
|
Application |
Contaminants
removed |
|
critical cleaning; =
final
rinsing; general degreasing of metals & other surfaces |
assembly residues, =
resin
and flux residues, general contaminants, oil & greases |
HEALTH & =
SAFETY:
Safety goggles and impervious gloves should be w=
orn
when handling any industrial chemical, including Dynasolve SP9110. Please consult the MSDS before use=
or
disposal.
|
The information in this
sheet is based upon our own research and is considered accurate. However, we make no warranty eit=
her
expressed or implied regarding accuracy and results to be obtained, becau=
se
operating conditions of users are beyond our control. |
Last
Revised By: Lauri Kirby Last Revision Date: 11/09/01 |