![](3D"DynasolveGC5100Web_files/image002.jpg")
DYNASOLV=
E GC5100
Solvent-=
Based
Vapor Degreaser Cleaner
Dynasolve GC5100 is a product designed for use in a va=
por
degreaser application for final cleaning in the removal of flux residues and
general soils. This product i=
s a
combination of a soak cleaning component and a vapor phase rinsing
component. By combining these
attributes into one product, the Dynasolve GC5100 provides both excellent
cleaning and residue-free rinsing.
The cleaning component remains in the cleaning bath area because of =
its
low evaporation rate. The rin=
sing
component is brought into the vapor phase area because of its high evaporat=
ion
rate. This method combines two
steps into one for a more user-friendly operation.
BENEFITS: =
&nb=
sp; =
&nb=
sp;
=
· = superior cleaning performance
· = high flash point
· = removes all types of solder flux
· = removes solder paste residues
· = removes oils and processing residues
OPERATING RECOMMENDATIONS:
|
|
Wash bath make-up s=
hould be
100%. Can be used in most v=
apor
degreaser machines. Most un=
its
will require heating solvent 110-150°F/ 43-65°C. Optimum temperature must be dete=
rmined
for specific equipment and cleaning requirements. Can also be used in soak baths w=
ith
mechanical agitation such as ultrasonics or spray-under-immersion. |
|
Rinsing |
When using in vapor
degreaser equipment, rinsing is completed in the vapor phase. If using in other equipment, rin=
se
with IPA or acetone. |
|
Dry |
Dry with forced air=
, oven,
or other appropriate method.
Drying methods may not need to be implemented when using vapor
degreaser equipment. |
TYPICAL
SPECIFICATIONS:
|
Appearance |
colorless to light =
amber |
|
Flash point |
>140°F/60&de=
g;C |
|
Specific gravity |
1.056 |
|
Foam |
very low foam |
|
Viscosity |
water thin |
APPLICATIONS:=
|
Application |
Contaminants
removed |
|
stencils, fingers,
misprints, screen printer, assemblies, through-hole & surface mount
electronics; carrier components |
reflowed flux resid=
ues;
uncured SMD adhesives, raw solder pastes & reflowed paste residues; o=
ils
& processing residues |
HEALTH & =
SAFETY:
Safety goggles and impervious gloves should be w=
orn
when handling any industrial chemical, including Dynasolve GC5100. Please consult the MSDS before use=
or
disposal.
|
The information in this
sheet is based upon our own research and is considered accurate. However, we make no warranty eit=
her
expressed or implied regarding accuracy and results to be obtained, becau=
se
operating conditions of users are beyond our control. |
Last
Revised By: Lauri Kirby Last Revision Date: 11/01/01 |